4G Cat.1 for NEO/NEO Core/NEO Air User Manual

Mcuzone_WXJ

4G Cat1 works with NEO/NEO Core+Debian:


Hardware platform:
NanoPi NEO/ NEO Core   4G Cat.1

Software Platform:
friendlycore-xenial

Image file:
h3_sd_friendlycore-xenial_4.14_armhf_20210618.img

NanoPi NEO/ NEO connects to a PC through a serial port.
Open the serial port tool and enter ifconfig. You can see that 4G is identified as eth1 but has no IP address. In root mode, enter "udhcpc -i eth1" to obtain the IP address.
The identification results of NEO and NEO Core are the same.

Mcuzone_WXJ

4G Cat1 works with NEO Air+Debian:

Hardware platform:
NanoPi NEO Air   4G Cat.1

Software Platform:
friendlycore-xenial

Image file:
h3_sd_friendlycore-xenial_4.14_armhf_20210618.img

NanoPi NEO/ NEO connects to a PC through a serial port.
Open the serial port tool and enter ifconfig. You can see that 4G is identified as eth1 but has no IP address. In root mode, enter "udhcpc -i eth0" to obtain the IP address.

Mcuzone_WXJ

4G Cat1 works with NEO/NEO Core/NEO Air+Ubuntu:

Hardware platform:
NanoPi NEO/ NEO Core   4G Cat.1

Software Platform:
friendlycore-focal

Image file:
h3_sd_friendlycore-focal_4.14_armhf_20210618.img

NanoPi NEO/ NEO connects to a PC through a serial port.
Open the serial tool,use the nano in the/etc/resolv.conf file add "nameserver 8.8.8.8"



Enter ifconfig and you can see that 4G is recognized as enx..



The identification results of NEO/NEO Core/NEO Air are the same.