MCUzone English Homepage

MCUzone is founded by some engineers, who loves to use MCU for their projects. They would like to share their experiences with those who also use MCU. Base on this, MCUzone was born.
We hope this can be a communication platform for engineers.

We know engineers want to speed up their design, so we chose, design & ship powerful tools for you. Currently we focus on ATMEL's products, from micro MCU AVR to powerful ARM926ej chip.

• Contact us via MSN

hotislandn@hotmail.com
hdapple_2000@hotmail.com

• direct buy from our ebay store

MCUzone ebay store

• Accept payment (International)
  1. Bank Wire Transfer
  2. Western Union
  3. Paypal
  4. Alibaba

• FAX: +86-571-89908193

• Core board + Base board design
• AT91SAM9261s, industrial, Pb free, 217BGA
• 64MB SDRAM
• 4MB dataflash, AT45DB321 (optional, will not appear with Rev.B 9261 chip)
• 128MB NAND Flash
• JTAG debug port
• 3-wire UART
• 10/100M Ehternet, with status LEDs
• Audio I/O (AT73C213)
• SD socket
• 5-wire USART, support RS485 & ISO7816 protocol
• two USB2.0 Host port, compatible to OHCI USB 2.0 FS spec
• one USB2.0 FS Device port
• 3.5” TFT LCD, QVGA(240×320), with touchscreen(ADS7843)
• 4 Keys
• 4 Leds

• VC9261-EK board x 1
• TFT LCD module(with touchscreen) x 1
• Voltage regulator x 1
• USB Device cable x 1
• Ethernet Cable x 1
• DVD (contains Spec, Software, Sch) x 1
• 20-PIN Cable x 1

• Core Board + Base Board design
• AT91SAM9263, Silicon Revision: B (can boot from NAND)
• 64MB SDRAM
• 4MB dataflash (optional)
• 128MB NAND Flash
• Optinoal Nor Flash on Core Board
• USB 2.0 Device Port x 1 (USB 2.0 Full speed)
• USB 2.0 HOST Port x 2 (USB 2.0 Full speed)
• JTAG Debug Port (20-PIN, ARM JTAG-ICE compatible)
• 10/100M Ethernet
• 3.5” TFT QVGA LCD with touch screen
• DBGU port
• USART port
• SD/MMC card socket
• CAN PHY interface(optinal)
• on board GPS receiver
• GTM900B compatible GPRS interface (Optional)

• MDK9263-G (with GPS, without all optional parts) x 1
• QVGA TFT LCD (with touch screen) x 1
• wiggler (with 20-pin cable) x 1
• voltage regulator x 1
• USB Device cable x 1
• Serial comm cable x 1
• Ethernet Cable x 1
• DVD-ROM x 1

• Core Board + Base Board design
• AT91SAM9263
• 64MB SDRAM
• 4MB dataflash (optional, NA by default)
• 128MB NAND Flash
• Optinoal Nor Flash on Core Board
• USB 2.0 Device Port
• USB 2.0 HOST Port
• JTAG Debug Port
• 10/100M Ethernet
• 3.5” TFT LCD with touch screen
• DBGU port
• USART port
• SD/MMC card socket
• CAN interface(optinal)
• I2C EEPROM(24C02)

• VC9263-EK x 1
• TFT LCD (with touch screen) x 1
• wiggler (with 20-pin cable) x 1
• voltage regulator x 1
• USB Device cable x 1
• Serial port cable x 1
• Ethernet Cable x 1
• DVD-ROM x 1

• AT91SAM9263, industrial, Pb free, Rev.B (boot directly from NAND)
• 64MB SDRAM
• 4MB dataflash (:!:optional, NA by default)
• 128MB NAND Flash
• 10/100M Ethernet
• Optional NOR Flash
• most GPIO on expansion slot
• EBI0 signals on expansion slot
• On board 1.2v & 3.3v voltage regulators, only 5v DC in needed
• Suitable to directly use in customer's application

• MDK9263 Core Board x 1

• AT91SAM9261S, industrial, Pb free, 217BGA
• 64MB SDRAM
• 4MB dataflash (:!:optional, NA by default, can upgrade to 8MB)
• 128MB NAND Flash (can upgrade to 256MB)
• 1.27mm DIMM, 2x50x2
• All GPIO on expansion PIN
• Suitable for directly use in user application

• MDK9261 Core Board

• AT91SAM7S64, 64KB Flash, 16 KB RAM
• USB Device Port
• two USART
• 3 LEDs
• 4 Keys
• SPI expansion slot
• LCM expansion slot, suitable for HD44780 compatiable LCM
• 2 ADC inputs
• I2C EEPROM
• RTC PCF8563 (battery not included)

• S64DEK-V2 Board x 1
• Wiggler debugger(with 20-pin Cable) x1
• USB Cable x 1
• CD ROM x 1

• USB Device Port
• DBGU Serial port
• RS232 USART port
• JTAG port
• serial CAN communication ports(optinal)
• RMII Ethernet 100-base TX with auto MDIX Capability
• Power LED and general-purpose LEDs
• I2C EEPROM
• SD card slot

• 7x256EK Board x 1
• 20-pin JTAG Cable x 1
• USB Cable x 1
• CD ROM x 1

• USB interface
• Work with ARM Multi-ICE server
• Support most ARM7, ARM9, PXA250
• Programmable JTAG Clock, from 2.5KHz ~ 10MHz
• Support target power from 2.5V ~ 5V
• RDI interface, support SDT, ADS, IAR, RealView…

• USB Multi-ICE x 1
• USB Cable x 1
• JTAG 20-pin Cable x 1
• CD ROM x 1

• Support any ARM7/ARM9, Cortex-M3
• Download speed up to 800KB/s (with DCC)
• Work with most IDEs: ADS, Realview, Keil, IAR
• JTAG speed up to 12MHz
• 20-pin standard ARM ICE JTAG port
• Support target voltage from 1.2V ~ 5.0V
• Multi-Core debug support
• Full Jlink Feature: RDI, JFLASH BP, JFLASH DL
• Flash downloader for most Flash
• GDB server, work with GDB
• auto select JTAG speed
• Firmware upgrade support

• Jlink ARM debugger x 1
• USB Cable x 1
• 20-pin JTAG Cable x 1
• CD ROM x 1

• Support any ARM7/ARM9 From ATMEL
• Download speed up to 800KB/s (with DCC)
• Work with most IDEs: ADS, Realview, Keil, IAR
• JTAG speed up to 12MHz
• 20-pin standard ARM ICE JTAG port
• Support target voltage from 1.2V ~ 5.0V
• Multi-Core debug support
• Full Jlink Feature: RDI, JFLASH BP, JFLASH DL
• Flash downloader for most Flash
• GDB server, work with GDB
• auto select JTAG speed
• Firmware upgrade support

• SAM ICE x 1
• USB Cable x 1
• 20-pin JTAG Cable x 1
• CD ROM x 1

• Standard 20-pin ARM JTAG port
• Support JTAG speed from 15KHz ~ 15 MHz
• Support any ARM7/ARM9 , PXA, Cortex-M3
• Support IDEs: ADS, Realview, IAR, Keil
• Support debug CP15, MMU can be enabled when debugging
• USB 2.0 High speed

• USB H-JTAG x 1
• USB Cable x 1
• 20-pin JTAG Cable x 1
• CD ROM x 1

• two kinds of housing, Left is metal, right one is plastic
• Faster Speed, lower price
• Implement JTAG mkII protocol, support debug AVR devices with JTAG port
• Implement debugWIRE protocol, support debug AVR devices with debugWIRE
• Implement ISP mkII protocol, support program AVR devices with JTAG & debugWIRE port
• Support debug AVR32 devices, including UC3 series, AP7000 series
• Support debug Xmega devices, including JTAG and PDI interface
• Support firmware upgrade, we will provide the firmware
• Wide target voltage range: 1.8V - 5.5V, interface protect hardware
• The speed of ISP program and JTAG program is more fast than mkII
• Q&A

• USB AVR JTAGICE mkII-CN x 1 :!:choose one from the above two
• 10-pin cable x 1
• USB Cable x 1
• JTAG2ISP adapt board x 1
• CD ROM x 1

• Faster Speed, lower price
• Implement JTAG mkII protocol, support program AVR devices with JTAG port ONLY, no debug via JTAG support
• Implement debugWIRE protocol, support debug AVR devices with debugWIRE
• Implement ISP mkII protocol, support program AVR devices with JTAG & debugWIRE port
• Support debug AVR32 devices, including UC3 series, AP7000 series
• Support firmware upgrade, we will provide the firmware
• Wide target voltage range: 1.8V - 5.5V, interface protect hardware
• The speed of ISP program and JTAG program is more fast than mkII

• USB AVR JTAGICE mkII Lite V2 x 1
• 10-pin cable x 1
• USB Cable x 1
• ISP2JTAG adapt board x 1
• CD ROM x 1